How to Save Money and Stay Warm With New Insulation Techniques

Source: iStock

All walls need some kind of insulation, otherwise you’re risking a loss of heat in your home through cool drafts, thermal leakage, or actual condensation and damage along the inside of the wall itself.

By adding this barrier between your walls, you will be able to reduce drafting, dust build-up, noise pollution, and the temperature on your thermostat, creating savings on your utility bill. However, if you live in an older house with no pre-existing form of interior padding, then your best option is blown-in insulation. Unlike the common batting which is often installed in walls as the original construction is being performed, this loose fill material is literally pumped into the pre-existing wall through a small opening made by your contractor.

Get Some Help

This type of procedure may be more complicated than it sounds, especially if you’re filling in around awkward angles or walls with a brick or stucco exterior. Though blown-in insulation is especially useful for these types of walls—you certainly don’t want to tear down expensive structures just to install traditional batting—it does require special training and equipment. Even the handiest of handymen will need to hire a trained insulation contractor for this kind of task. Most crews are very experienced in making the proper hole or entryway into the wall, and have specialized hoses, machines, pumps, and material in order to get the job done efficiently and effectively. Most jobs take less than a day including drilling, filling, and then re-plugging the gap they created in your wall, though all of this depends on the size of your wall and how many holes they’ll have to make. Qualified contractors will also match your paint to finish the job, clean up after themselves, and also provide information about the task they performed; including the type and amount of material they used.

Source: iStock

Materials

Blown-in insulation comes in many different forms depending upon the type of project and your own personal preference.

Fiberglass: This type of padding is common in most houses, especially in a traditional batting form. It simply consists of thin glass fibers which trap the air. However, when pumped into a pre-existing wall, larger holes may have to be drilled because it takes more pressure to blow this material into the space. On the other hand, it will also dry out quickly and is therefore especially useful for wetter areas that generate condensation.

Foam: This is a very powerful form of insulation with a very high R-value—or the measure of insulation protection—but it isn’t used very much today. It can shrink and form gaps, thereby negating the whole point of the product. It can also expand, which could make the wall bow, bend and become damaged.

Cellulose insulation

Source: iStock

Cellulose: This is a very common form of blown-in insulation because it is environmentally friendly and healthy to human contact. It is made from shredded and often recycled newsprint which is then treated with fire retardant. Additionally, it won’t irritate the skin because it is non-toxic, yet still has the same R-value as any other material.

Cost

The cost of blown in insulation is very affordable, most of the time ranging from 60-90 cents per square foot. Of course, they may have to charge a little extra for the drilling and painting, especially if they’re dealing with more complicated exterior walls consisting of brick, stucco, or siding. Also, many times the contractor will have to overfill the area, pumping excess material into the wall in order to compensate for residual settling that may occur over time. However, this product is still very affordable and absolutely necessary for your home to stay energy efficient during cold weather seasons.

More From Wall St. Cheat Sheet:

Want more great content like this? Sign up here to receive the best of Cheat Sheet delivered daily. No spam; just tailored content straight to your inbox.

More Articles About:   , ,